Volkswagen RCD 310 – Conexiunile dispozitivului, schema de baza

Volkswagen RCD 310 pin assignments

Volkswagen RCD 310 pin assignments

1. Aerial Connector

DAB aerial input connection, optional

or

SDARS aerial input connection for vehicles for USA and Canada

2. Multi-pin connector 1, 8-pin, for loudspeaker outputs

1 –  Rear right loudspeaker, positive
2 –  Front right loudspeaker, positive
3 –  Front left loudspeaker, positive
4 –  Rear left loudspeaker, positive
5 –  Rear right loudspeaker, negative
6 –  Front right loudspeaker, negative
7 –  Front left loudspeaker, negative
8 –  Rear left loudspeaker, negative
3. Multi-pin connector 2, 8-pin, for voltage supply lines and CAN bus
 
9 –  CAN bus, high
10 –  CAN bus, low
11 –  Display voltage supply, positive
12 –  Voltage supply, negative, terminal 31
13 –  Display HV CAN bus low
14 –  Display HV CAN bus high
15 –  Voltage supply, positive, terminal 30
16 –  Anti-theft coding control signal, SAFE, positive
4. Multi-pin connector 3, 12-pin, for telephone and microphone signals
 
1 –  Microphone input, negative
2 –  AUX output, audio, right
3 –  AUX output, common signal earth
4 –  Microphone output, negative
5 –  Telephone audio input signal left, negative
6 –  Telephone audio input signal right, negative
7 –  Microphone input, positive
8 –  AUX output, audio, left
9 –  Microphone output, positive
10 –  Telephone mute (mute switch for radio)
11 –  Telephone audio input signal left, positive
12 –  Telephone audio input signal right, positive

5. Multi-pin connector 4, 12-pin, for CD changer control and CD audio input signals

1 –  AUX signal input, left
2 –  AUX signal earth
3 –  CD changer, audio signal earth
4 –  CD changer, voltage supply, positive, terminal 30, contact continuous load greater than 1 A, temporary peak load 5 A
5 –  Not assigned
6 –  CD changer, DATA OUT
7 –  AUX signal input, right
8 –  CD changer, left audio channel, CD/L
9 –  CD changer, right audio channel, CD/R
10 –  CD changer, control line, switched positive
11 –  CD changer, DATA IN
12 –  CD changer, CLOCK (internal check protocol for data flow monitoring)
6. Aerial Connector

AM/FM aerial input connection

7. Aerial Connector

FM 2 aerial input connection

1 comentariu

  1. Iulian Răspunde

    Salut, pot porni acest aparat, in casa, doar cu o sursa de 12Vcc/5A?
    Daca da, ce trebuie sa mai conectez la el, in afara de + si -, de la sursa de alimentare?
    Multumesc.

Lasă un răspuns

Acest site folosește Akismet pentru a reduce spamul. Află cum sunt procesate datele comentariilor tale.